Caring for Your Pleated Slope Brass Shade
The Pleated Slope 12 Inch Brass Shade combines a modern angular silhouette with the warm look of brass. Its pleated metal surface diffuses light softly, but those folds can also collect dust. With the right approach, you can keep the shade clean without dulling its finish or bending the pleats.
What the Catalog Confirms About This Shade
The Pleated Slope shade is made from metal with a brass finish. It measures 12 inches (H5 x W30 x D30 cm). The sloped, pleated design is intended to stay open and airy, so cleaning should preserve those crisp edges. The supplied information does not include specific cleaning instructions, so the following advice is based on general best practices for painted or lacquered brass fixtures.
Gentle Dusting Routine
Dust the shade weekly to prevent buildup in the pleats. Use a soft, dry microfiber cloth or a clean makeup brush that can reach into the folds. Lightly wipe from the top of the shade downward, following the slope. Avoid applying pressure that could dent the metal.
- Microfiber cloth: Lint-free and soft, it traps dust without scratching the brass finish.
- Soft brush: A wide, soft paintbrush or a dedicated duster brush works well for pleated surfaces.
How to Deep Clean the Shade
If dusting alone isn't enough, a damp cleaning can remove smudges or greasy residue. Always test on an inconspicuous area first.
- Step 1: Prepare a mild cleaning solution: Mix a few drops of mild dish soap with warm water. Do not use abrasive cleaners, ammonia, or vinegar, as they can damage the brass lacquer.
- Step 2: Dampen a soft cloth: Dip a microfiber cloth into the solution and wring it out thoroughly. The cloth should be damp, not wet, to avoid water seeping into any seams or electrical fittings.
- Step 3: Wipe the shade gently: Follow the direction of the pleats. Use a light touch to avoid bending the metal. For stubborn spots, let the damp cloth sit on the area for a few seconds before wiping.
- Step 4: Dry immediately: Use a separate dry microfiber cloth to buff the shade dry. This prevents water spots and ensures no moisture lingers on the brass finish.
What to Avoid
Do not use spray cleaners directly on the shade, as liquid can run into the light socket or electrical wiring. Avoid rough sponges or scouring pads that can scratch the lacquer. Never submerge the shade in water. If you are unsure about a cleaner, test it on the bottom edge of the shade where it won't be visible.
Pleated Slope 12 Inch Brass Shade at a Glance
- Pleated Slope - 12 Inch - Brass - Shade Only: Dimensions: H5 x W30 x D30 cm (12 inch width). The compact size makes it easy to handle during cleaning. The 12 inch width is small enough to hold securely with one hand while wiping.

Pleated Slope - 12 Inch - Brass - Shade Only - Pleated Slope - 12 Inch - Brass - Shade Only: Pleated metal shade in a sloped, angular shape. Brass finish. The metal construction is durable but the pleats can trap dust. The brass finish needs gentle care to stay lustrous.
- Pleated Slope - 12 Inch - Brass - Shade Only: Designed as a shade only; compatible with pendant fittings (see specifications). When cleaning, remember that the shade is separate from the light socket. Ensure the power is off and the bulb is cool before handling.
When to Call a Professional
If your shade has tarnished or developed spots that gentle cleaning cannot remove, consider consulting a professional metal restorer. The supplied information does not specify whether the brass is lacquered or raw, so attempting to polish with metal polish could remove a protective coating. When in doubt, stop cleaning and seek expert advice.


