Torna al blog
Guide pratiche 2026-11-16 Industville Official - Modern, Retro, Industrial Lighting 9 visualizzazioni

Rift Slatted Wooden Wall Light Placement and Mounting Guide

Rift Slatted Wooden Wall Light Placement and Mounting Guide

Plan where the Rift slatted wooden wall light works best and follow a practical mounting sequence, from checking the IP20 indoor rating to choosing a brass or bronze holder.

Start with the indoor-only rating

The Rift Slatted Wooden Wall Light - Dark is rated IP20, which means it is for indoor use only. That single fact rules out bathrooms with high moisture, covered outdoor porches and any spot where the fitting could get splashed. Keep it in dry, interior rooms where the slatted wood shade can do its job without damp affecting the veneer or metal holder.

Within that boundary, the light is designed to cast a soft, diffused glow and create subtle patterns of light and shadow. That makes it a good candidate for walls where you want atmosphere rather than a bright task light, such as a hallway, living space or cosy nook.

What the catalog confirms before you plan the wall

  • Rift Slatted Wooden Wall Light - Dark: IP rating: IP20, for indoor use only. This is the first placement checkpoint. It keeps the fitting out of wet or damp zones and confirms it is a dry-room wall light.
    Rift Slatted Wooden Wall Light - Dark
    Rift Slatted Wooden Wall Light - Dark
  • Rift Slatted Wooden Wall Light - Dark: Dimensions: H31 x W15 x D10 cm. Use these supplied measurements to check the wall space you have in mind. The light is a compact cylinder, so it can sit in narrower areas, but you still need to allow for the holder and the wall surface around it.
  • Rift Slatted Wooden Wall Light - Dark: Available in Dark Wood / Brass Holder and Dark Wood / Bronze Holder. The holder finish is the main visual decision. Brass reads warmer and brighter against dark wood; bronze sits back and blends more quietly. Neither changes the indoor-only rating.

A practical mounting sequence for a wooden wall light

The supplied product information does not include a full installation manual, so the steps below are general preparation checks rather than manufacturer instructions. If the fitting arrives with its own instructions, follow those first.

  1. 1. Confirm the room is dry and indoor: Because the Rift is IP20 and indoor-only, choose a hallway, living room, bedroom or similar dry space. Avoid bathrooms, shower rooms, kitchens with heavy steam and any outdoor wall.
  2. 2. Check the wall area against the supplied dimensions: The fitting is H31 x W15 x D10 cm. Mark out that footprint on the wall with painter's tape so you can see how it relates to door frames, artwork, furniture and switches before you commit.
  3. 3. Decide the holder finish before you drill: Choose Brass Holder or Bronze Holder first, because the finish affects how the light reads against your wall colour and nearby metals. Brass is the more visible accent; bronze is the quieter option.
  4. 4. Plan the cable and switch access: The supplied information does not confirm cable length, terminal placement or whether the fitting is switched on the unit. Check the product page and any included instructions for those details before you finalise the wall position.
  5. 5. Use a qualified electrician for the electrical connection: Wall lights need a safe connection to the fixed wiring. The catalog does not provide wiring instructions, so have a qualified electrician handle the supply and any necessary isolation.
  6. 6. Fit the light, then check the glow: Once installed, view the light from the main seating or walking position. The slatted shade is designed to cast a soft, diffused glow with subtle patterns of light and shadow, so check that those patterns fall where you want them rather than across a TV or mirror.

Where the Rift works best, room by room

  • Hallway: A slatted wood wall light hallway placement works well because the soft, diffused glow adds warmth without glare. Use it on a wall you pass rather than stare at, and check the H31 x W15 x D10 cm size against narrow hallways so it does not crowd the walkway.
  • Living room: As a dark wood wall light living room choice, the Rift suits a cosy corner, a chimney breast or a wall beside shelving. The slatted design creates subtle shadow patterns, so place it where those patterns can be seen on a plain wall rather than hidden behind furniture.
  • Bedroom: For wood wall light bedroom ideas, consider the Rift as a soft ambient layer rather than a reading light. The catalog describes a soft, diffused glow, not a directional beam, so pair it with a separate bedside task light if you need focused light.
  • Cosy nook: The designer note specifically names cosy nooks. A compact cylinder like this can sit above a small chair or bench, but keep the IP20 indoor-only rating in mind and avoid anywhere that gets damp.

Brass or bronze: the one finish decision the catalog confirms

The Rift comes in two holder finishes: Dark Wood / Brass Holder and Dark Wood / Bronze Holder. The shade itself is dark wood veneer with a slatted design, laser cut for consistency. The holder is a flat, sleek metal piece that complements the striped shade.

Choose brass if you want the holder to catch the eye and add a warm metallic accent. Choose bronze if you want the metal to recede and let the slatted wood pattern lead. Both are the same fitting and both carry the same IP20 indoor-only rating, so this is a visual decision rather than a performance one.

What the supplied information does not settle

The catalog does not confirm cable length, dimming compatibility, bulb type or whether the fitting includes a switch. It also does not include a full installation manual. Treat those as questions to check on the product page or with the supplier before you buy, especially if you are planning a specific wiring route or want to dim the light.

What the catalog does settle is the core placement rule: IP20, indoor use only, with supplied dimensions of H31 x W15 x D10 cm. Start there, choose your holder finish, and let the slatted wood shade do the atmospheric work in a dry, interior room.

Articoli correlati

Customer Service
Home
Prodotti
Carrello
Profilo