How to Install a Knurled Torch Wall Holder
By Industville Official - Modern, Retro, Industrial Lighting | Published: 2026-10-23
Category: How-to Guides
Learn how to safely install a knurled torch wall holder, including wiring, mounting, and common mistakes to avoid. Step-by-step guide for a clean finish.
Quick answer
To install a knurled torch wall holder, first turn off power at the breaker, then connect the fixture wires to your junction box, secure the mounting bracket, attach the holder, and finally install the bulb and test.
Before you start: tools and safety
You will need a voltage tester, wire strippers, screwdrivers, a drill with masonry bits (for brick or concrete walls), wall anchors, and a level. Always verify the power is off at the breaker before touching any wires.
The knurled torch wall holder is designed for hardwiring to a standard junction box. If your wall lacks a box, you will need to install one that supports the fixture's weight.
Wall type considerations
Drywall requires toggle bolts or molly anchors to hold the weight of a metal holder. For brick or tile, use a carbide drill bit and plastic wall plugs. The pointed form and brass construction add heft, so secure anchoring is essential.
If mounting on a feature wall with uneven texture, use a level to mark the bracket position precisely. The rounded wall mount base can hide slight imperfections, but a level fixture looks more professional.
Installation steps
- Turn off power and test: Switch off the circuit breaker for the room. Use a voltage tester on the wires in your junction box to confirm no current is present. Common mistake: testing only with a non-contact tester on the outside of the wire—always touch the tester to the bare copper or use a multimeter for certainty.
- Connect the wiring: Strip about 1/2 inch of insulation from the fixture wires. Connect the black (hot) wire to the black supply wire, white (neutral) to white, and green/bare (ground) to the grounding screw on the bracket. Use wire nuts and wrap with electrical tape. Checkpoint: ensure no bare wire is exposed outside the wire nut. A loose connection can cause flickering or short circuits.
- Attach the mounting bracket: Screw the provided bracket to the junction box using the included screws. The bracket must be flush against the wall surface and level. Common mistake: overtightening the bracket can strip the threads or crack the box—snug is sufficient.
- Mount the wall holder: Slide the knurled torch holder over the bracket, aligning the screw holes. Secure it with the fixture screws, tightening alternately to keep it level. Checkpoint: the rounded base should sit flush against the wall. If it gaps, check that the bracket is not tilted or that the wall surface is uneven.
- Install bulb and test: Screw in the appropriate bulb (check fixture rating for max wattage). Restore power at the breaker and flip the switch to verify operation. Common mistake: using a bulb with a higher wattage than rated can overheat the holder—always match the recommended specification.
Product details
- Knurled Torch Wall Holder - Brass - Holder Only: The Knurled Torch Wall Holder - Brass - Holder Only features a textured knurled pointed metal wall holder with a flat, rounded base. Dimensions: H22 x W12.5 x D15 cm. The knurled texture adds grip and visual depth, but the pointed form means the holder extends outward—ensure your junction box is positioned to allow clearance from the wall surface.
Knurled Torch Wall Holder - Brass - Holder Only
